- Beta and gamma
- Our offer
- Life Sciences
- Nuclear & Health physics
- Defense & Security
- Environment & Recycling
- industrial organization
- Resources
- About us
- Contact
- Careers
SA – Air Monitoring station
The SA environmental monitor is used for continuous measurement of aerosol activities in all gaseous effluents. It can be fully integrated into environmental radiation monitoring systems.
The SA air monitoring station is designed to complete gamma radiation monitoring systems in environment networks, where continuous monitoring of the particulate with nuclide identification is required.
It combines β & γ aerosol activites and spectrum measurement within the environment. The station aimed at monitoring outdoor particulate activities as part of a national or regional environment network, around nuclear facilities and nuclear sites.
The SA sation is existing in 2 versions:
• The SA 200 version is equipped with a strong pump system allowing a high air flow rate for very accurate measurements.
• The SA 210 version is designed for situations requiring autonomous monitoring autonomous from main supply. It has a low power pump incl. battery pack modules, and performing a lower flow rate.
Get a quote for
SA – Air Monitoring station
Radiation type:
Detector type beta:
- 2.000 mm2 large sensitive silicon diode for beta activity
Detector type gamma:
- High resolution and very sensitive 1,5 x 1,5” LaBr3(Ce) detector (2.9% for Cs137)
Energy range:
- Beta: 80 keV to 3 MeV
- Gamma: 50 keV to 2 MeV
Sampling volume:
- SA200: 17 m³/h
- SA210: 3 m³/h
Filter paper roll:
- Millipore
Temperature range:
- From –30 °C to +50°C (-22°F to +122°F)
Compensation:
- Automatic ambient gamma background compensation and Radon progenies
Alarms / Display:
- No display and no locla alarm signaling : connection via Ethernet to an external PC or supervision
Storage:
- Database on local embedded computer
Data format:
- xml (N42.42 format) files sent to FTP server or direct access to database
Communication:
- Embedded PC connection (Ethernet)
Communication options:
- Wireless router (GPRS, GSM, Radio, Satellite) for data transfer to a centralization system
Compliance with CEM norms:
- EMI emission: EN 61000-6-4
- EMI immunity: EN 61000-6-2
Variant:
- SA200 / 210 -NG : Noble gas volumetric activity and gamma dose rate (with additional SpectroTRACER 1,5 x 1,5” LaBr3)
Options:
- Snow protection and pipe connection
- Combined aerosol activity and spectrum measurement
- Dynamic compensations of gamma background and natural radon progenies
- Redundant communication systems available
- Calculation of activity in Bq/m² or Bq/m³ for nuclides indentification
- Low power consumption version (SA210) for emergency systems
- The SA air monitoring station is used for continuous measurement in all gaseous effluents of particulate volumetric activity.
- The sample is pulled by means of a pumping unit (3m³/h or 17m³/h flow rate according to versions) and then transferred to a detection assembly.
- The monitor, based on an embedded low power industrial computer, calculates the measured volumetric activity and triggers alarms whenever preset threshold levels are exceeded.
- A SpectroTRACER probe can be optionally placed on the top of the monitor to allow both gamma dose rate and measurements and noble gas monitoring.
For SA200 version:
- SA 200: beta and gamma particulate
- SA200-NG: beta and gamma, noble gas volumetric activity and gamma dose rate (with additional SpectroTRACER NaI(Tl))
- Optional heating and ventilation kit
- Sampling line extension
For SA210 version:
- SA 210: beta and gamma particulate activity
- SA 210-I: beta and gamma particulate activity (with specific charcoal filter)
- SA210-ING: beta and gamma particulate, noble gas volumetric activity and γ dose rate (with additional SpectroTRACER NaI(Tl) and specific filter)
Reasons to choose SA – Air Monitoring station
Gamma background and Radon / Thoron discrimination
Combined aerosol activities and spectrum measurement
High reolution and very sensitive
4 days battery backup (SA210 version)
Redundant data transmission possible, for example GSM and satellite
Video
Bertin Instruments offers a broad range of sensors and turnkey network solutions for all tasks related to the monitoring of radiation in the environment including gamma dose rate measurement, spectroscopic analysis and air monitoring.
Bertin Instruments’ probes and stations are dedicated to various applications: monitoring around nuclear facilities, area surveillance, nationwide early warning systems, mobile & quick deployment solutions for emergency scenarios.
Related Applications
Facilities monitoring network
Facilities monitoring network
Online environmental radiation monitoring system for facilities in day-to-day operations, from limited to wide areas
Improving worker radiation protection
Improving worker radiation protection
The radiation exposure of workers must be controlled in line with WHO recommendations, with professional radiameters or survey meters suitable for any kind of working conditions.
Monitoring of major events
Monitoring of major events
Environmental radiation monitoring of major events ranging from handheld instruments and access control up to wide areas surveillance, with data transmitted to headquarters in real-time.
Nationwide monitoring network
Nationwide monitoring network
Environmental radiation monitoring system for nationwide automated monitoring networks, with long-term autonomy.
Radiological air monitoring
Radiological air monitoring
Real time measurement of radioactive particulates and gas activitiy inside or outside nuclear facilities, or for national surveillance
Radioactivity measurement & characterization of high-contaminated waste
Radioactivity measurement & characterization of high-contaminated waste
Control of high radioactivity levels can be done only with dedicated instruments able to measure radiation up to 300 Gy/h.
Related products
ANY QUESTIONS? CONTACT AN EXPERT
Please fill in this form if you wish to contact our sales team or receive further information.
